Start with your machine’s horsepower, then choose the profile that matches the work. ANBO confirms lift capacity, width, mount, hydraulics, and final configuration before production.
Both families use ANBO’s machine-matched approach. The choice is mainly about how the attachment engages the ground and how much bulky material you want to carry.
A rounded bottom-tine profile rolls into the ground more gradually, giving the operator better control while raking, digging roots, and working near the surface.
A longer, flatter tine profile creates a deeper carrying area and a larger opening for brush, logs, and other high-volume material.
Side-profile drawings and tine measurements from ANBO’s comparison sheets. Dimensions are shown in inches; ask ANBO to confirm the current configuration for your machine.
| Model | Rake outer / inner | Grapple outer / inner |
|---|---|---|
| GRSC | 1/4" / 1/4" | 3/8" / 1/4" |
| GR30 | 1/4" / 1/4" | 3/8" / 1/4" |
| GR45HC | 3/8" / 3/8" | 3/8" / 3/8" |
| GR60HC | 1/2" / 3/8" | 1/2" / 3/8" |
| Model | Rake outer / inner | Grapple outer / inner |
|---|---|---|
| GR75 | 5/8" / 1/2" | 5/8" / 1/2" |
| GR75HC | 5/8" / 1/2" | 5/8" / 1/2" |
| GR120 | 3/4" / 5/8" | 3/4" / 5/8" |
| GR120HC | 3/4" / 5/8" | 3/4" / 5/8" |
| GR140 | 3/4" / 3/4" | 3/4" / 3/4" |
| GR140HC | 3/4" / 3/4" | 3/4" / 3/4" |
The GR120 and GR140 rakes in this comparison do not have a rake tine bar.
| Model | Rake outer / inner | Grapple outer / inner |
|---|---|---|
| GR160 | 3/4" / 5/8" | 3/4" / 5/8" |
| GR160HC | 3/4" / 5/8" | 3/4" / 5/8" |
| GR180 | 3/4" / 3/4" | 3/4" / 3/4" |
| GR180HC | 3/4" / 3/4" | 3/4" / 3/4" |
| GR200 | 1" / 1" | 1" / 1" |
| GR200HC | 1" / 1" | 1" / 1" |
| Model | Rake outer / inner | Grapple outer / inner |
|---|---|---|
| GR300 | 1-1/4" / 1" | 1-1/4" / 1" |
